Xiamen Dervos Valves Industry Co., Ltd

Extraordinary Suppliers of Forged Valves in China

Home > News > Content
Forged Steel Ball Valve Accessory Options
- Jun 01, 2017 -

Forged steel ball valve in the field use, many are often not because of the quality of forged steel ball valve itself, but the use of forged steel ball valve caused by improper use, such as the installation environment, installation location and direction of improper or the pipeline is not clean and other reasons Caused by.

Forged steel ball valve should be installed before the pipeline to clean, remove dirt and welding slag. After installation, in order to ensure that no impurities remain in the valve body, the valve should also be cleaned again, that is, access to the media should make all the valve open, so as not to impurity stuck. After using the handwheel mechanism, it should be restored to the original neutral position.

In order to make the forging ball valve in the event of failure or maintenance of the production process can continue, forged steel ball valve should be bypassed. At the same time should also pay special attention to the installation of the valve position is consistent with the requirements of the process.

Forged steel ball valve is mainly applied to all kinds of fire power station on the pipeline, cut off or connected to the pipeline medium. Applicable medium: water, steam and other non-corrosive media. Forged steel ball valve and other valve products compared to the characteristics of high temperature and pressure, unique self-sealing design, the higher the pressure, the more reliable sealing. Due to the performance of technical characteristics, the special conditions of the product also formed a substitute for other products can not be the characteristics.

Forged Ball Valves Accessories Options The following accessories are available for different controls and requirements:

Cut off accessories: single solenoid valve, double solenoid valve, limit switch switch.

Adjustable accessories: electrical positioner, pneumatic positioner, electrical converter.

Air handling accessories: air filter pressure relief valve, air handling three pieces.

Manual mechanism: HVSD manual

Forged steel ball valve with a new series of GT-type pneumatic actuators, double acting and single acting (spring reset), rack and pinion drive, safe and reliable; large diameter valve with a series of AW-type pneumatic actuator pull fork drive, reasonable structure , The output torque is large, there are double acting and single acting.

1, gear-type double piston, the output torque, small size.

2, the choice of aluminum alloy cylinder material, light weight, beautiful appearance.

3, can be installed at the top, the bottom of the manual operating mechanism.

4, rack-type connection can adjust the opening angle, rated flow.

5, the actuator optional signal feedback instructions and various accessories to achieve automatic operation.

6, IS05211 standard connection for the installation and replacement of the product provides a convenient.

7, the two ends of the adjustable section of the screw can make the standard products in 0 ° and 90 ° with ± 4 ° adjustable range. To ensure synchronization accuracy with the valve.